| FW Date |
Windows |
Mac OS/Arduino |
Description (see included SequarVx.x.txt for full
description) |
| 03/03/22 V.1.0 |
vv See Newest Version vv |
vv See Newest Version vv |
Release version 1.0. Can't re-install
or will damage existing Songs saved. |
| 20/03/22 V.1.1 |
SequarHEX-V1_1-Windows10.zip |
vv See Newest Version vv |
Fixed: Layer Rec Count Hang on
click, BPM not loading, TRAX UserScale -1, ORD:STACK CVMode changes
left notes in stack, Bridge Seq Displaying for any TRAX Letter,
EDIT:SAVE CVout 2 second lockup, new TRAX not saved in PlayList id
PlayList not viewed, TRAX NoteFX Repeat skips 1st step & cursor in the
wrong step
Improvements: TRAX Repeat Randomize gain now exponential, NoteFX
CopyFrom loads with present NoteFX# in case of accidental selection |
| 03/04/22 V.1.2 |
SequarHEX-V1_2-Windows10.zip |
sequar4dist_V1_2.zip |
Fixed: Layer Record Big Beat Lockup,
PLFX prog TRAX new QB Lockup, TRAX Micro-Arp Copy From & set while
stopped, Master Transpose note display, glitchy encoder scrolling
(some units).
Improved:Song:00 always armed, Arp CV Notes now displayed, Remote/PLFX
Solo/Mutes return to orig. state, Layer now records SysEx (trial
version) |
| 07/04/22 V.1.3 |
SequarHEX-V1_3-Windows10.zip |
sequar4dist_V1_3.zip |
Fixed: Layer Record Big Beat 1-shot
lockup, No longer locks buttons. Fixed Layer Mirror limits (now works
fine!) Added: Layer Clock Start Recording option CLOCK:START:YES |
| 20/04/22 V.1.4 |
SequarHEX-V1_4-Windows10.zip |
sequar4dist_V1_4.zip |
Fixed: PL display of LayerSeq#'s,
Unlocked LayerQB Seq access, Layer 1-Shot now per LayerQB, Arp
Overflow during TRAX EchoFX, TRAX +Swing Skipping PLFX/Condit's
Improved: Encoder knob action, Yellow LED blanking after Stop, Arps
Latched seize after stop.
Redundancy: Removed hold Play button to self clock; use Self-clocking
mode instead. |
| 05/05/22 V.1.5 |
SequarHEX-V1_5-Windows10.zip |
sequar4dist_V1_5.zip |
Fixed: Multiple QB Highlights, Layer
Size in PL, CKo as Clock Out triggering Midi Notes, more.
Improvements: Layer Seq Select from QB recalls arrow when returns;
LayerRec Clock Start note replaced with ch10 Hold Pedal off (CC64) as
more benign; TRAX audition recognizes if drum channel or not, refines
selection to type; TRAX Audition in PL recalls previous Song/TRAX#.
New! If self-clocking (BPM) press [CLOCK:/1] QB to highlight, then
press again to sync Beat 1.
*This is a final update for the next months, unless something vital is
required. |
| 10/06/22 V.1.6 |
SequarHEX-V1_6-Windows10.zip |
sequar4dist_V1_6.zip |
Fixed: in MIDI PUSH: block CCval
sending while changing CC#, Automation Record Alignment +
couldn't record over previous recording, SongFX Edit from Play List
not recognizing MIDI Remote Learns, Remote Controlled Layer Record was
not clearing TRAX record if was active, In TRAX Record QB: TRAX REC
LEN=YES was causing random NoteFX assignments.
Improved: Added [Delete] to Automation QB, Added [KILL LAST] to
Track Remote Notes overlay, TRAX Steps Editable past Size limit, Track
Remote Record Key with Layers can now be toggled. |
| 29/06/22 V.1.7 |
SequarHEX-V1_7-Windows10.zip |
sequar4dist_V1_7.zip |
Fixed:PLFX Scales not working while
in TRAX, Drums Names Display sticking, CV Notes hanging during Scale
change, Remote JumpTo leaving Markers in PL, Remote Control of NoteFX#
was not working, TRAX Brodge & Swing Seq's resetting by same letter
block with different PLFX#, Layer Chan Filter showing Channel 01
activity when no Channel 01.
Added: Layer Bar STep FX now can use SongFX channel mask filter. Can
now record CV Gate/Notes to TRAX. CC5/6/CKo inputs to Notes has 1 mS
delay to allow CV stability. |
| 19/07/22 V.1.8 |
SequarHEX-V1_8-Windows10.zip |
sequar4dist_V1_8.zip |
Fixed: CV MODE CC Jacks: Function
CC2CV: CC# not remote/PLFX modifiable. Display rogue "N" char in
[TUNE:+0] menu.
Added: TRAX ducking now ducks Layers. NEW: TRAX Step Record (while not
playing) of notes and/or chords. Steps progress with each note/chord
added to SIZE, then loop to BOTTOM.
Factory: Added support for reversed encoder type |
| 19/09/22 V.1.9 |
SequarHEX-V1_9-Windows10.zip |
sequar4dist_V1_9.zip |
Fixed: Encoder jumps / old code.
Added Expansion software V.0.0
Changed: MIDI PUSH Vitals = NO stops all CC's sent during song load or
from PUSH button press
Improved: TRAX note editing Preview (stopped massive notes playing
during adjust)
Added: Layer Self record beta. Records all internally to a Layer
(access: REC UNTIL:TRAX:) |
| 17/12/22 V.2.0 |
SequarHEX-V2_0-Windows10.zip |
sequar4dist_V2_0.zip |
Fixed: Clock issues, PL bad returns,
startup Voltages, TRAX Audition bad note, CC:Pitchbend&After touch, AT
(PC) running status, Envelope Aftertouch MIDI out.
Improved: On stop MIDI Push, TRAX Setup Rows=Lanes, TRAX Name Erase,
CC Smooth rate up to 10, Play List briefly displays row# when
vertically scrolled, TRAX audition faster.
(See included text file for more detailed descriptions,
Manual updated for V.2.0) |
| 11/01/23 V.2.023 |
SequarHEX-V2_023-Windows10.zip |
sequar4dist_V2_023.zip |
Fixed: Layer Quant not arming via
remote/PLFX/CV,Solo/Mute causing Bridged notes locked on, CC LED's not
updating until change after stop/start, CV Mode CC src Layer wasn't
working, LINK & Select Bus merging into MIDI out unmaskable, TRAX FILL
adding unwanted note, FILL size set only by user or Copy/Paste, minor
fixes.
Added: Metronome notes triggering Layer records blocked. TRAX vertical
lane scaling. Improved factory scaling throughout, New MIDI/LINK Masks
for THRU.
(See included text file for more detailed descriptions,
Manual updated for V.2.023)
{Soon! MIDI Routing diagram is new, addendums } |
| 20/02/23 V.2.1 |
SequarHEX-V2_1-Windows10.zip |
sequar4dist_V2_1.zip |
Fixed: Env
Overload, LayerStepFX Remote & bad exit, Empty Scale Mask Lockup,
Layer PL_transp not updating after a jump, Layer Scales Mis-loading in
settings. Improved CV2MIDI note
Lengths, TRAX randomness. Added Layer Note Probability, JumpTo Kill
Last (immed. bar jump). This fixes a number of issues so worthwhile
updating. |
| 09/03/23 V.3.0 |
SequarHEX-V3_0-Windows10.zip |
sequar4dist_V3_0.zip
MAC req's IDE V.1.8.10 ! |
Deprecated AU QB &
PL Track. Fixed: Layer StepFX Remote, Layer init StepFX wrong settings
Added: Layer STOP LAST, TRAX Lane Record & Solo, Layer CC display,
VIEW SONG QB. Many improvements including live BPM updates, Env
Trigger Free-run updates immed., Scrolling in TRAX after 15 seconds,
Layer Rec Big Display |
| 09/03/23 V.3.1 |
SequarHEX-V3_1-Windows10.zip |
sequar4dist_V3_1.zip
MAC req's IDE V.1.8.10 !
or Easy upload(incl) |
Fixed: TRAX FILL
64 overflow into NoteFX, Clock Output issues fixed
Improved:TRAX Preview chord, Remote Learn tog.Mute & JumpTo, TRAX
SOLO/PL now like JumpTo+Solo, masked Remote arming causing permanent
arming of block when stopped
Added: SONG VIEW TRAX - shows 4 TRAX (16 lanes) at once. |
| 09/06/23 V.3.2 |
SequarHEX-V3_2-Windows10.zip |
sequar4dist_V3_2.zip
MAC req's IDE V.1.8.10 !
or Easy upload(incl) |
Fixed: TRAX Menus
getting corrupted on record notes, TRAX delete, other menu anomalies
Improved: TRAX Editor entry defaults to horizontal, TRAX Setup is at
top of pop-up (copy/paste now below), Layer Loop Step Sequencer now
has next-bar step Audition (uses "P" button while playing) |
| 28/08/23 V.3.3 |
SequarHEX-V3_3-Windows10.zip |
sequar4dist_V3_3.zip
MAC req's IDE V.1.8.10 !
or Easy upload(incl) |
Fixed: TRAX Menus
getting corrupted on record notes, TRAX delete, other menu anomalies
Improved: TRAX Editor entry defaults to horizontal, TRAX Setup is at
top of pop-up (copy/paste now below), Layer Loop Step Sequencer now
has next-bar step Audition (uses "P" button while playing) |
| 18/10/23 V.3.4 |
SequarHEX-V3_4-Windows10.zip |
N/A Not released due to V.3.5 |
Non-vital update:
Fixed: [View Song] entry not displaying QB's, JumpTo (groups)
displaying symbols after group 9
Fix for units with new OLED displays as of 17/10/23. Purchased units
after this date may not display correctly if loaded with earlier
firmware than 3.4 |
| 25/10/23 V.3.5 |
SequarHEX-V3_5-Windows10.zip |
sequar4dist_V3_5.zip
MAC req's IDE V.1.8.10 !
or Easy upload(incl) |
Vital Update:
Fixes corruption of display of VCO names in TUNE QB during calibration
procedure. Adds CV Mode Glide Chop feature augmenting VCO glides and
FX. |
| 03/11/23 V.3.6 |
SequarHEX-V3_6-Windows10.zip |
sequar4dist_V3_6.zip
MAC req's IDE V.1.8.10 !
or Easy upload(incl) |
Feature & Fix
Update: Fixes PlayList TRAX double-addnew, TRAX legacy mode exits,
Layer QB entry, Envelope Drums mix on jacks, more! Feature Add: CV
Mode Drums Triggers on CC1-6 jacks. |
| 27/11/23 V.3.7 |
SequarHEX-V3_7-Windows10.zip |
sequar4dist_V3_7.zip
MAC req's IDE V.1.8.10 !
or Easy upload(incl) |
Feature,
Improvement & Fix
Update: Fixes TRAXnoteFX Micro-Arp "Copy From" Trax2-5, TRAX Row Edit
Delay max'ed at 14 ticks, VCO "rings" causing bad auto-tuning,
Improved tuning, Now can use MIDI in while in [TUNE:+0] menu, Pitch
Bend can be used while live TRAX Recording, Added DJ Mixxx (& others?)
Note2Clockout feature. Uses DrimTrigger length as latency compensation
setting.
Minimal impact on menu or function as clock notes 32 or 34 on Ch.10
only. |
| 24/01/25 V.3.8 |
SequarHEX-V3_8-Windows10.zip |
sequar4dist_V3_8.zip
MAC req's IDE V.1.8.10 !
or Easy upload(incl) |
Feature, Addition
& Fix Update: New! Settings:TRAX:LENGTH:1-23 global default value for
all new TRAX notes (Instead of fixed at 23) Also affects Recording
when Len parameter is fixed. Value can be changed before recording for
that TRAX QB if needed as before. During TRAX or LAYER Record mode,
beat #1 now lights all 4 green LEDs. Yellows act as before.
Expansion software added for testing of possible Expansion unit to be
released.
Fixes: Remote control of "TRAX Bottom" and "Size" Parameters when note
controlled now work properly! Occasional locked on Yellow LED's (until
changed) after recording is fixed. |
